HPCDIY-UPDL2 Computer

HPCDIY-UPDL2は、1CPUで最大2GPUのDeep Learning(深層学習)向けGPU静音ミドルタワーワークステーションです。
対応するGPUは
  GeForce RTX 2080 ti
  NVIDIA TITAN RTX
です。

主な特徴ハードウェア仕様インストールされるソフトウェア

最低価格: ¥444,140

最高価格: ¥3,238,710

この構成での価格: ¥0

HPCDIY-XSL108TS-Silent Barebone   +¥175,070
1 x 3年間センドバック保守   +¥0

* 必須項目

この構成での価格: ¥0

商品説明
詳細

主な特徴

  1. Single Socket R4 (LGA 2066) supports Intel® Xeon® processor W Family
  2. Intel® C422 chipset
  3. Up to 512GB reg. ECC LRDIMM, up to DDR4-2666MHz; 8 DIMM slots
  4. 3 PCI-E 3.0 x16 (8/16/16, 48 lanes), 1 PCI-E 3.0 x4
  5. M.2 Interface: 2 PCI-E 3.0 x4
    M.2 Form Factor: 22110/2280
    M.2 Key: M-Key (RAID 0,1 support)
  6. U.2 Interface: 2 PCI-E 3.0 x4
  7. ALC 1220 7.1 HD Audio, 1 COM, 2 GbE LAN, 2 USB 3.0 (front)
  8. 4 internal 3.5" drive bays
  9. 900W High Efficiency Power Supply

ハードウェア仕様

Product SKUs
SuperWorkstation
  • SYS-5039A-i (Black)

  • Motherboard
    Super X11SRA

    Processor
    CPU
  • Intel® Xeon® Processor W Family
  • Single Socket R4 (LGA 2066),
    CPU TDP support up to 140W

  • GPU Support
  • GeForce RTX 2080 ti
  • NVIDIA TITAN RTX
  • NVIDIA Quadro シリーズ

  • System Memory
    Memory Capacity
  • 8 DIMM slots
  • Up to 512GB Registered ECC LRDIMM
  • Up to 256GB Registered ECC RDIMM
  • Up to DDR4-2666MHz
  • Memory Type
  • 2666/2400/2133MHz ECC DDR4 SDRAM
  • DIMM Sizes
  • 64GB, 32GB, 16GB, 8GB, 4GB

  • On-Board Devices
    Chipset
  • Intel® C422 chipset
  • SATA
  • SATA3 (6Gbps) via Intel C422 controller
  • RAID 0, 1, 5, 10 support
  • Network Controllers
  • Single LAN with Intel® PHY I219LM LAN controller
  • Single LAN with Aquantia 5G LAN chip AQC108
  • Audio
  • ALC 1220 7.1 HD Audio

  • Input / Output
    SATA
  • 6 SATA3 (6Gbps) ports from Intel® C422
  • LAN
  • 2 RJ45 Ethernet LAN ports
  • USB
  • 6 USB 3.0 ports (4 rear + 2 headers)
  • 6 USB 2.0 ports (2 rear + 4 headers)
  • 2 USB 3.1 (2 Type A)
  • Audio
  • 7.1 HD Jacks
  • Serial Port / Header
  • 1 COM port (header)
  • TPM
  • 1 TPM 1.2 20-pin Header

  • Expansion Slots
    PCI-Express
  • 3 PCI-E 3.0 x16 slots (8/16/16, 48 lanes)
  • 1 PCI-E 3.0 x4 slot
  • M.2
  • M.2 Interface: 2 PCI-E 3.0 x4
  • M.2 Form Factor: 22110/2280
  • M.2 Key: M-Key (RAID 0,1 support)
  • U.2 Interface: 2 PCI-E 3.0 x4

  • System BIOS
    BIOS Type
  • UEFI 256Mb
  • BIOS Features
  • ACPI 3.0 or later
  • SMBIOS 2.7 or later
  • BIOS rescue hot-key
  • SPI dual/quad speed support
  • RTC wakeup
  • Chassis
    Form Factor
  • Mid-Tower
  • Model
  • CSE-732D3-903B

  • Dimensions and Weight
    Height
  • 16.7" (424mm)
  • Width
  • 7.6" (193mm)
  • Depth
  • 20.68" (525.3mm)
  • Gross Weight
  • 35.5 lbs (16.1 kg)
  • Available Colors
  • Black

  • Front Panel
    Buttons
  • Power On/Off button
  • LEDs
  • Power LED
  • Hard drive activity LED
  • Network activity LED
  • System Information LED
  • Ports
  • 2 front USB 3.0 Ports
  • 1 Line-out, 1 Mic-in

  • Drive Bays
    Internal
  • 4 fixed 3.5" drive bays
  • Enterprise SATA HDD only recommended
  • Peripheral
  • 2 optional 5.25" Peripheral drive bays
  • 1 optional card reader module

  • System Cooling
    Fans
  • 1x 12cm rear exhaust fan
  • Optional 1x 12cm front cooling fan

  • Power Supply
    900W AC multi output power supply
    AC Voltage
  • 100-240 V, 50-60 Hz, 10-6 Amp
  • +5V Standby
  • 3 Amp
  • +12V1
  • 25 Amp
  • +12V2
  • 25 Amp
  • +12V3
  • 25 Amp
  • +12V4
  • 25 Amp
  • +5V
  • 25 Amp
  • +3.3V
  • 25 Amp
  • -12V
  • 0.5 Amp
  • Certification   Gold Level
    Note: • Max. continuous combined load on +3.3V and +5V output shall not exceed 155W.
    • Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W.

    PC Health Monitoring
    CPU
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
  • 6-Phase-switching voltage regulator
  • FAN
  • Low noise fan speed control
  • Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI

  • Operating Environment / Compliance
    RoHS
  • RoHS Compliant
  • Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)

  • インストールされるソフトウェア

    OS
  • Ubuntu 16.04 LTS または
  • Ubuntu 18.04 LTS
  • GPU Driver
  • NVIDIA®Driver
  • Docker
  • NVIDIA®Docker 2
  • Library
  • CUDA Toolkit 10.0
  • cuDNN
  • NCCL
  • Deep Learning Framework
  • Caffe, pyCaffe, Digits (on Conda create python=2.7)
  • TensorFlow, Keras (on Conda create python=3.6)
  • Chainer (on Conda create python=3.6)
  • PyTorch (on Conda create python=3.6)
  • GPUリソース対応
    ジョブスケジューラ
  • Torque または
  • SLURM
  • システムバックアップ
  • システムをクローンしてBootable Media (HDD/SSD(SATA/NVMe),内蔵/外付) を作成するソフトウェア
  • 追加情報
    追加情報
    筐体形状 WS
    最大GPU数 (TITAN RTX は半分) 2GPU
    GPU間Interface PCIe
    CPU数 1CPU
    CPU世代 Skylake
    Network Interface 5GBase-T
    レビュー
    あなたのレビューを投稿する
    レビュー中の商品: HPCDIY-UPDL2 Computer
    商品のタグ
    商品のタグ

    タグを区切る場合は半角スペースを使用してください。単語にはシングルクオート(')を使用してください。