HPCDIY-XCLGPU2R1S-DL Computer

HPCDIY-XSLGPU2R1S-DLは、第二世代Intrel Xeon Scalable Processorを1基で、最大2GPUのDeep Learning(深層学習)向けGPUラックマウントサーバー(1U)です。
対応するGPUは
  TESLA V100(32/16GB)
  GeForce RTX 2080 ti
です。

主な特徴ハードウェア仕様インストールされるソフトウェア

最低価格: ¥517,490

最高価格: ¥5,933,200

この構成での価格: ¥0

HPCDIY-XSLGPU2R1S Barebone   +¥243,140
1 x 3年間センドバック保守   +¥0

* 必須項目

この構成での価格: ¥0

商品説明
詳細

主な特徴

  1. Single Socket P (LGA 3647) supports 2nd Gen. Intel® Xeon® Scalable processor (Cascade Lake/Skylake)
  2. 6 DIMMs; up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM††
  3. 2 PCI-E 3.0 x16 slots (support double-width GPU), 1 PCI-E 3.0 x16 low-profile slot (center left)
  4. 3x Hot-swap 3.5" SAS/SATA drive bays
  5. 2x 10GBase-T LAN ports via Intel X550
  6. 2x M.2 form factor 2280, supports both M.2 NVMe and SATA SSD
  7. 8x Heavy duty 4cm counter-rotating 4cm fans with air shroud & optimal fan speed control
  8. 1400W High-efficiency Power Supply
    Platinum Level (94%+)

ハードウェア仕様

Product SKUs
SYS-5019GP-TT
Motherboard
Super X11SPG-TF
Processor/Cache
CPU
  • Single Socket P (LGA 3647)
  • 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)
  • Support CPU TDP 70-205W
Cores
  • Up to 28 Cores
Note BIOS version 3.0b or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
GPU Support
  • NVIDIA® Tesla® P100/P40/P4/M60
System Memory
Memory Capacity
  • 6 DIMM slots
  • Up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
  • Supports Intel® Optane™ DCPMM††
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset
  • Intel® C621 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Connectivity
  • Intel® X550 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • ASPEED AST2500
Input / Output
SATA
  • 6 SATA3 (6Gbps) ports
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
  • 2 USB 2.0 ports (rear)
Video
  • 1 VGA port
Serial Port
  • 1 Fast UART 16550 header
DOM
  • 2 DOM (Disk on Module) power connectors
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
Management
Software
Power Configurations
  • ACPI / APM Power Management
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-818GTS-1K43BP2
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 28.2" (716mm)
Weight
  • Net Weight: 28 lbs (12.70 kg)
  • Gross Weight: 36 lbs (16.33 kg)
Available Color
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • Network activity LEDs
  • System Overheat LED / Fan fail LED
Expansion Slots
PCI-Express
  • 1 PCI-E 3.0 x16 slot (center right)
  • 1 PCI-E 3.0 x16 slot (right riser)
  • 1 PCI-E 3.0 x16 slot (left riser)
Drive Bays / Storage
Hot-swap
  • 3 Hot-swap 3.5" SAS/SATA drive bays
M.2
  • Supports 2 M.2 form factor 2280
  • Supports both M.2 NVMe and SATA SSD
Peripheral Bay(s)
  • 1 slim DVD-ROM drive bay or 1 USB + COM port tray
System Cooling
Fans
  • 8 heavy duty counter-rotating 4cm fans with air shroud and optimal fan speed control
Power Supply
1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
AC Voltage
  • 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz
  • 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
+5V standby
  • 6 Amp
+12V
  • 100 Amp/115 Vac
  • 117 Amp/230 Vac
With Power Distributor
  • +5V: 14 Amp
Certification Platinum Certified
Platinum Certified
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)

インストールされるソフトウェア

OS
  • Ubuntu 16.04 LTS または
  • Ubuntu 18.04 LTS
GPU Driver
  • NVIDIA®Driver
Docker
  • NVIDIA®Docker 2
Library
  • CUDA Toolkit 10.0
  • cuDNN
  • NCCL
Deep Learning Framework
  • Caffe, pyCaffe, Digits (on Conda create python=2.7)
  • TensorFlow, Keras (on Conda create python=3.6)
  • Chainer (on Conda create python=3.6)
  • PyTorch (on Conda create python=3.6)
GPUリソース対応
ジョブスケジューラ
  • Torque または
  • SLURM
システムバックアップ
  • システムをクローンしてBootable Media (HDD/SSD(SATA/NVMe),内蔵/外付) を作成するソフトウェア
追加情報
追加情報
筐体形状 ラックマウント
最大GPU数 (TITAN RTX は半分) 2GPU
GPU間Interface PCIe
CPU数 1CPU
CPU世代 Cascadelake
Network Interface 10GBase-T
レビュー
あなたのレビューを投稿する
レビュー中の商品: HPCDIY-XCLGPU2R1S-DL Computer
商品のタグ
商品のタグ

タグを区切る場合は半角スペースを使用してください。単語にはシングルクオート(')を使用してください。