HPCDIY-EPC232R1S Computer

From ￥854,123 ￥776,475

To ￥8,423,619 ￥7,657,835

SKU

EPC232R1S

Key Features
Virtualization
Cloud Computing
High End Enterprise Server

1. Dual AMD EPYC™ 7003/7002 Series Processors
(7003 Series Processor drop-in support requires BIOS version 2.0 or newer)

2. 8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs

3. Expansion slots:
2 PCI-E 4.0 x16 (FH / 9.5"L) slots
1 PCI-E 4.0 x16 (LP) slot
1 PCI-E 4.0 x16 (internal proprietary LP slot)
[ Details ]

4. Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License
key (SFT-OOB-LIC) included
for OOB BIOS management

5. Dual 10GBase-T LAN ports via Intel® X710-AT2

6. Drive Bays:
4 hot-swap 3.5" SATA3 by default
or 4 NVMe (via optional drive tray)
or 4 SAS3 (via optional SAS kit)

7. 1000W Redundant Power Supplies
Titanium Level (96%+)
(Full redundancy based on configuration
and application load)


Processor/Chipset

CPU	Dual AMD EPYC™ 7003/7002 Series Processors (7003 Series Processor drop-in support requires BIOS version 2.0 or newer) Socket SP3 Supports CPU TDP up to 280W*
Cores	Up to 64 Cores
Chipset	System on Chip (SoC)
Note	* Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization


System Memory

Memory Capacity	32 DIMM slots Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM 8-channel memory bus
Memory Type	DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes	4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


Expansion Slots

1U	2 PCI-E 4.0 x16 (FH/HL 9.5") slots 1 PCI-E 4.0 x16 (LP) slot 1 PCI-E 4.0 x16 (internal proprietary LP slot) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)


Input / Output

SATA	4 SATA3 (6 Gbps) ports
LAN	Dual 10GBase-T LAN ports via Intel® X710-AT2 1 RJ45 Dedicated IPMI LAN port
USB	3 USB 3.0 ports (2 rear + 1 Type A)
VGA	1 VGA port
SAS	4 SAS3 ports support via optional SAS kit
NVMe	4 NVMe support via optional drive tray
Others	1 COM port (rear) 2 SATA DOM power connector TPM 1.2 header


System BIOS

BIOS Type	AMI 128Mb SPI Flash EEPROM
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1


Dimensions and Weight

Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	29" (737mm)
Package	7.8" (H) 23.66" (W) 37.13" (D)
Weight	Net Weight: 26 lbs (11.8 kg) Gross Weight: 41 lbs (18.6 kg)


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED


Backplane

HDD Backplane	Supports 4 SATA3 or 4 NVMe or 4 SAS3 HDD


System Cooling

Fans	8 heavy-duty PWM fans with optimal fan speed control
Air Shroud	2 Air Shroud


Power Supply
1000W Redundant Power Supplies with PMBus
Total Output Power	800W/1000W
Dimension (W x H x L)	73.5 x 40 x 203 mm
Input	100-127Vac / 9.8 - 7A / 50-60Hz 200-240Vac / 7 - 5A / 50-60Hz 200-240Vdc / 7 - 5A (for CCC only)
+12V	Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) Max: 83A / Min: 0A (200-240Vdc)
12Vsb	Max: 2.1A / Min: 0A
Output Type	25 Pairs Gold Finger Connector
Certification	Titanium Level [ Test Report ]


PC Health Monitoring

CPU	Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
FAN	Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I²C Temperature Sensing Logic
LED	CPU / System Overheat LED
Other Features	Chassis Intrusion Detection Chassis Intrusion Header


Operating Environment / Compliance

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F)* Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)
Note	* Support for operating 35°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details.